H.S Kumaraswamy

Designation : Associate Professor

Area of specialization :Computer Integrated Manufacturing

Date of Joining BNMIT : 21/7/2014

Nature of Association (Regular/Contractual/Adjunct) : Regular

E-mail Id :kumaraswamyhs@bnmit.in  

No. of years of Experience :8

Qualification

DegreeInstitutionMonth & Year of Passing
Ph.D

(Thesis Submitted)

Department of Mechanical Engineering, Global Academy of Technology,  under VTU  BelgaumJune 2020
M.Tech

(Computer Integrated Manufacturing)

Department of Mechanical Engineering, DSCE, VTU, Bangalore2013
B.EHKBKCE, VTU, Bangalore, India2011

Experience:

SI. No.DesignationInstitutionDuration
1Assistant Professor, Department of Mechanical EngineeringBNMIT, Bangalore, India21-07-2014 – Till date
2Assistant Professor, Dept. of Mechanical Engineering,Vemana Institute of Technology, Bangalore, India07-07-2013 – 10-07-2014

Awards/ Achievements/Memberships:

  • Received Letter of Appreciation from management for securing 97.5% faculty appraisal during 2018-19
  • Received Letter of Appreciation from management for securing 98.3% faculty appraisal during 2017-18
  • Received Letter of Appreciation from management for securing 92.4% faculty appraisal during 2016

Expertise/Subjects handled

  • Operation Research
  • Control Engineering
  • Computer Integrated Manufacturing
  • Manufacturing Process Metal Casting and welding
  • Engineering Economy
  • Automation in robotics
  • Automation in Manufacturing

Research Interest:

  • Developmentof Advanced Engineering Materials including Polymers, Metals and
  • 3 D PrintingTechnology
  • Mechanical Characterization of Engineering Materials
  • Development of Filament for 3-D Printing

Funding Received

Nil

Journals

  • Kumaraswamy, H.S Design and fabrication of 3-D Printed Prosthetic Arm, International journal of current engineering and scientific research (IJCESR) ISSN (PRINT): 2393-8374, (ONLINE): 2394-0697, VOLUME-7, ISSUE-9, 2020
  • Kumaraswamy, H.S, “Microstructure and Mechanical Properties of sintered Al 2024 boron fiber- Graphite hybrid MMCs: Conf. Series 1455 (2020) 012024 IOP Publishing doi:10.1088/1742-6596/1455/1/012024
  • Kumaraswamy, H.S, “Development and Fabrication of Smart Waste Segregator”  Lecture Notes in Mechanical Engineering book series (LNME) , https://doi.org/10.1007/978-981-32-9931-3_6, ISBN-978-981-32-9930-6, Springer, Singapore,
  • Kumaraswamy, H.S., Bharat, V. and Rao, T.K. (2019) Influence of Boron Fiber Powder and Graphite Reinforcements on Physical and Mechanical Properties of Aluminium 2024 Alloy Fabricated by Stir Casting. Journal of Minerals and Materials Characterization and Engineering, 7, 103-116. https://doi.org/10.4236/jmmce.2019.73008
  • Kumaraswamy H. S, Bharat V, T. Krishna RaoEffect of Stirring Parameters on Micro-structure of Aluminum Hybrid Metal Matrix Composites” IOP Series: Materials Science and Engineering 376 (2018) 012096 doi:10.1088/1757-899X/376/1/012096
  • Kumaraswamy H. S, Arun Joshi, Anilkumar,“A comparative study of mechanical properties of as cast and heat-treated Al-6063-MWCNT composite fabricated by stir casting process IOP Conf. Series: Materials Science and Engineering 376 (2018) 012075 doi:10.1088/1757-899X/376/1/012075
  • Kumaraswamy H. S,Bharat V, T. Krishna Rao, “Influence of Mechanical & Tribological Behaviour of Al 2024 MMC fabricated by stir casting technique- A Review”, Materials Today: Proceedings 5 (2018), Volume/Issue 5/ pp. 11962-11970
  • H S Kumaraswamy, Vishnu P, Manjunath A R, “Finite Element Analysis and Cost Effective Design for Roll Over Protection Structure (ROPS) of Soil Compactor” International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE), ISSN (Online) 2456-1290, Vol 2, Issue 4, April 2017
  • Kumaraswamy H S,Veeresh Bhusnur, “Importance of Simulation in Manufacturing” International Journal of Innovative Science and Research Technology, ISSN No: – 2456 – 2165, Volume 2, Issue 4, April– 2017
  • Kumaraswamy H S,Venkatesh M K,“Characterization of pultruded fiber reinforced high performance polymer matrix composite with carbon nano tubes”, International Journal of Metallurgical & Material Science and Engineering, ISSN(P): 2278-2516; ISSN(E): 2278-2524,    Vol. 4, Issue 1, Feb 2014, 1-8(IF-6735)

 Conference

  • Presented the paper entitled Dry sliding wear behavior of Dry Sliding Wear behavior of Al 2024 boron fiber -graphite hybrid MMCs Fabricated by Powder Metallurgy Technique” International conference on trends in Mechanical engineering, ICTMES 2020, Hassan, Karnataka.
  • Presented the paper entitled “Microstructure and Mechanical Properties of sintered Al 2024 hybrid MMCs” in the International Conference on Recent trends in science, Engineering and Mathematics during 21-22 September 2019, Goa Candolim.
  • “Presented the paper entitled “A comparative study of mechanical properties of as cast and heat treated Al-6063-MWCNT composite fabricated by stir casting process” in the International Conference on “Advances in Manufacturing, Materials & Energy Engineering (Icon MMEE-2018)” during 2nd & 3rd March 2018 organized by Department of Mechanical Engineering, MITE Moodabidre Jointly Patronized by BINGHAMTON UNIVERSITY , State University of New York
  • Presented the paper entitled “Effect of Stirring Parameters on Micro-structure of Aluminium Hybrid Metal Matrix Composites” in the International Conference on “Advances in Manufacturing, Materials & Energy Engineering (Icon MMEE-2018)” during 2nd& 3rd March 2018 organized by Department of Mechanical Engineering, MITE Moodabidre Jointly Patronized by BINGHAMTON UNIVERSITY, State University of New York
  • Participated and presented a paper entitled “Finite element analysis & cost effective design for roll over Protection structure (ROPS) of soil compactor” in the international conference on  Advance in Mechanical engineering Sciences (ICAMES-17) held during 21st – 22nd April 2017 at P.E.S College of engineering, Mandya .
  • Participated and presented a paper entitled “Infuence of Mechanical & Tribological behavior of Aluminum Metal Matrix composite Fabricated by Stir casting Technique” in the international conference on materials, manufacturing and modeling held during March 9th– 11th, 2017 at VIT University, Vellore
  • Participated and presented a paper entitled “Charecterization of Pultruded fiber Reinforced high performance polymer matrix with and without CNT” in ICCSEM on 26th September ,2013 at Bangalore which will be organized by Centre for post graduate studies Dayanada Sagar Institution
  • Participated and presented a paper entitled “Preparation of Resin /Nano Fillers mixture for Composites –A Case Study”in “National Conference on Emerging Trends in Engineering & Technology-2012” held on 9th March 2012, Conducted at Jyothi Institute of Technology Bengaluru

Hobbies

  • Playing Cricket
  • Shuttle badminton
  • Swimming
  • Driving & Trekking

Sports 

Music

Any other things

February

March 2021

April
MO
TU
WE
TH
FR
SA
SU
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
1
2
3
4
Events for March

1st

No Events
Events for March

2nd

No Events
Events for March

3rd

No Events
Events for March

4th

No Events
Events for March

5th

No Events
Events for March

6th

No Events
Events for March

7th

No Events
Events for March

8th

No Events
Events for March

9th

No Events
Events for March

10th

No Events
Events for March

11th

No Events
Events for March

12th

No Events
Events for March

13th

No Events
Events for March

14th

No Events
Events for March

15th

No Events
Events for March

16th

No Events
Events for March

17th

No Events
Events for March

18th

No Events
Events for March

19th

No Events
Events for March

20th

No Events
Events for March

21st

No Events
Events for March

22nd

No Events
Events for March

23rd

No Events
Events for March

24th

No Events
Events for March

25th

No Events
Events for March

26th

No Events
Events for March

27th

No Events
Events for March

28th

No Events
Events for March

29th

No Events
Events for March

30th

No Events
Events for March

31st

No Events
× How can I help you?