Institute Level:

• Worked as in charge of Head of Department
• Worked as NAAC criteria -5 college level coordinator
• Worked as Deputy Chief Superintendent of VTU Examinations

Department Level:

• Worked as NBA department coordinator
• Worked as AICTE and LIC coordinator
• Worke as coordinator for FDP, Seminars, Workshops
• Worked as Timetable Coordinator
• Worked as Lab in charge
• Worked as Project, Technical seminar and Intern ship coordinator

Awards/ Achievements/Memberships:

• Best Project award for the year 2021 under mechanical engineering category in 44^th series of KSCST.
• Certificate of Appreciation for 100% Result in subjects

Professional Memberships:

• Life Member of Indian Society for Technical Education (ISTE LM 87253).
• International Association of Engineers (Membership No:530753)

Expertise/Subjects handled

• Turbo Machines
• Heat and Mass Transfer
• Operations Research
• Fluid Mechanics
• Basic Thermodynamics
• Energy Engineering
• Operations Management
• Elements of Mechanical Engineering
• Computer Aided Engineering Drawing
• Engineering Mechanics
• Energy and Environment
• Waste Handling and Management.

Research Interest:

• Characterization of particulate Composite Materials
• Biofuels
• Renewable Energy

Funding Received

• Project guided by me titled “Application of Pneumatic Exo-Arms Used in Robots” funded by KSCST in year 2021.
• Project guided by me titled “Solar Powered Wheelchair with Bluetooth Controller for Aged and Physically Challenged People” funded by KSCST in year 2021.
• Project guided by me titled “Fabrication and Performance Testing of Efficient Stove for Rural use “funded by KSCST in year 2012

Publication

Journals

• Microstructure, Hardness and Wear Study of Al7075-B4C Metal Matrix Composites” published online 7th August 2024 in Journal of the Institution of Engineers (India): Series D.
• Investigating the Influence of Machining Parameters on Surface Roughness in AA2024/n-SiC Metal Matrix Composites using Cryogenic Coolant. Published in nano world journal, volume9, supplement3, November 03,2023, S907-S914.
• Synthesis and Characteristics of Heat Treated Al6061-Zirconium Dioxide Metal Matrix Composites”, published in online 2nd January 2023in Journal of the Institution of Engineers (India): Series D.
• Effect of Heat Treatment on Wear Rate of Al-4.5% wt. Copper Matrix Reinforced with Graphite and Zircon Sand Hybrid Composites”, in International Journal of Recent Advances in Multidisciplinary Topics Volume 3, Issue 5, May 2022.
• “Effect of Reinforcement, Load and sliding distance on Al-4.5%wt Copper Matrix Hybrid Composites”, International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249-8958, Volume-10 Issue-3S, February 2021.
• Design and Analysis of a Clamping Plate for Automobile using Press Tool” in International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249-8958, Volume-10 Issue-3S, February 2021.
• Microstructure Studies and Mechanical Characterization of T6 Heat Treated Aluminium and Copper Based Alloy Reinforced with Zircon and Graphite Composites” in Journal of science and engineering technology© school of engineering, Taylors university volume 14, issue 4, August 2019.
• Experimental investigation on mechanical properties and microstructure studies of AL – 4.5% Cu alloy reinforced with Zircon sand and Graphite”, International journal of Emerging trends in Engineering and development Page No: 106-117, Issue 6, vol 1(January 2016) Indexed ISSN 2249-6149.

Conference:

• Participated in and presented a paper entitled Effect of additives on silica sand mould for aluminum casting, international conference ICCTEST- 17 on JAN 5-7, 2017 at DBIT, Bangalore.
• Participated and presented a paper entitled Design and analysis of press tools for retainer of lower door hinge of an automobile, international conference ICCTEST- 17 on  JAN 5-7, 2017 at DBIT, Bangalore.
• Participated in and presented a paper entitled Design and Analysis of Injection Mould Tool For Machan B8INYAC, ICTAG14, on April 9-102014 Sivaji College of Engineering, Manivila.
• Participated and presented a paper entitled Dry Sliding Wear Study of Mild Steel Coated with Titanium, OEGC, Feb 3-5. 2011 RVCE, Bangalore.
• Participated and presented a paper entitled Design Effect of Base Sand and Additives on  Sand Mould for Al Castings in National Conference on CST2013 on April 22-23, 2013at NIT, Tiruchirappalli.
• Participated in and presented a paper entitled Experimental Study on Mechanical Properties of AA7005/ AL2O3 MMCs ON 011, , April 7-9,2011 DBIT, Bangalore.
• Participated and presented a paper entitled Effect of Additives on Olivine Sand Mould for Al Casting, National Conference on NCACHME -10, April 23-24, 2010.Shirdi Sai Engineering College, Bangalore.
•  Participated and presented a paper entitled, Effect of Additives on Chromate Sand Mould for Al Casting, National Conference, April 9-10, 2010, Shravana Belogola Institute of Technology, Shravana Belogola.

Hobbies

• Reading Books
• Travel
• Listening to Music

Sports 

Music

Any other things