Dr.P.L.Srinivasa Murthy
Designation : Professor
Area of specialization : Machine Design
Date of Joining BNMIT :10/8/2020
Nature of Association (Regular/Contractual/Adjunct) :Regular
E-mail Id :srinivasamurthy@bnmit.in
No. of years of Experience :34
Qualification
Degree | Institution | Month & Year of Passing |
Ph.D | Jawaharlal Nehru Technological University, Anantapuramu, A.P, India. | 2014 |
M.E | BMS College of Engineering, Bangalore University, Bangalore, Karnataka India. | 1990 |
B.E | R.V. College of Engineering, Department of Mechanical Engineering, Bangalore University, Bangalore, Karnataka India. | 1985 |
Experience:
SI. No. | Designation | Institution | Duration |
1 | Professor, Department of Mechanical Engineering | BNMIT, Bangalore, India | Aug 2020 – Till date |
2 | Associate Professor, Dept. of Mechanical Engineering, | M.S.Ramaiah Institute of Technology, Bangalore, Karnataka, India | 2003 to 2020 |
3 | Assistant Professor, Dept. of Mechanical Engineering | M.S.Ramaiah Institute of Technology, Bangalore, Karnataka, India | 2000 to 2003 |
4 | Senior Lecturer, Dept. of Mechanical Engineering | M.S.Ramaiah Institute of Technology, Bangalore, Karnataka, India | 1996 to 2000 |
5 | Lecturer, Department of Mechanical Engineering | M.S.Ramaiah Institute of Technology, Bangalore, Karnataka, India | |
6 | Project Consultant, Department of Management Studies | Indian Institute of Science, Bangalore | 1985 – 1986 |
Awards/ Achievements/Memberships:
Sl.No. | Particulars | ||
1. | No of invited lectures given by the teacher | 25+ | |
2. | No of invited lectures organized in the college by the teacher. | 05 | |
3. | Faculty development programme(like Summer School/Winter School/workshops) | a. No of proposal submitted | 4 |
b. No. conducted. | 3 | ||
c. No. attended | 50+ | ||
4. | No. of times worked as External Deputy Chief superintendent | 02 | |
5 | No. of times worked as Co-ordinator for university Theory/Practical Exams. | 06 | |
6. | No. of times worked as Squad member | Nil | |
7. | No. of paper presented at National level | 07 | |
8 | No. of papers presented at inter-national level | 05 | |
9. | Acquisition of Higher qualification with Management Support. | 2 Times. | |
10. | No. of Books/Monograms published | 15 | |
11. | No. research Papers | a. Submitted | |
b. Published | 45+ | ||
12. | No. of conferences attended ( both National /International) | 5 | |
13. | No. of conferences Conducted ( both National/International) | 7 | |
14. | No. of papers published in International Journals | 25 | |
15. | No. of Ph.D. candidates guided/guiding | 04 | |
16. | Any other relevant details, you would like to furnish | Details Submitted. |
MEMBERSHIP TO PROFESSIONAL BODIES
- LIFE MEMBER of ISTE, 13478(1993)
- FELLOW of Institute of Engineers. F-118956-1(2014)
- LIFE MEMBER of MRSI. LMB 2327(2014
- LIFE MEMBER of IA ENG (International Association of Engineers), Membership Number: 139622(2014)
CONFERENCES/FDP’S AND WORKSHOPS ORGANIZED
Sl.No | COURSE | DATE | ROLE |
1. | National Conference on Mechanical Engineering Design. |
19th & 20th 2004. |
Co-ordinator |
2. | Staff Development Program on “Recent Advances in Metrology, Engineering Measurements and Experimental Techniques”. |
16th June to 28th 2008. |
Organizing Committee Member |
3. | Workshop on Mechanical Testing –Measurement & Machining Theory and Practice |
20th to 22nd Feb 2009. |
Convenor. |
4. | National Seminar on Composite Technology Design, Manufacturing and Qualification Methodologies |
11th April 2009 | Organizing Committee Member |
5. | National Conference on Mechanical Engineering. | !3th & 14th Nov 2009. | Organizing Committee Member |
6. | One day seminar on Vibration and Vibration Measurement Techniques. | 28th Mar 2013. | Organizing Committee Member |
7. | One week FDP on “Vibration & Modal Analysis.”
| 19-23rd Aug 2014. | Co-ordinator |
8 | International Conference on Applied Science Engineering and Technology. IFERP | 6th and 7th June2016 | Organizing Committee Member Sri Sairam College of Engineering, Anekal- Bengaluru. |
9 | International Conference on Applied Science Engineering and Technology. IFERP | 6th and 7th June2016 | Organizing Committee Member Sri Sairam College of Engineering, Anekal- Bengaluru. |
SERVICE IN VARIOUS POSTS OF RESPONSIBILITY
- Exam Co-coordinator of Mechanical Department at RIT.
- Departmental ADVISOSY BOARD MEMBER for NMIT, Bangalore.
- Worked as Department ADVISORY BOARD and CURRICULUM DEVELOPMENT BOARD MEMBER at RIT.
- Member, B.O.E. of our college, Both for UG & PG.
- Member, B.O.S. of our college, Both for UG & PG.
- Member, B.O.S. of Dr.AIT.
- Member, B.O.E. of BMSCE.
- Member, B.O.E. of S.I.T, Tumkur, Both for UG & PG
- Member, B.O.E. of REVA UNIVERSITY, Both for UG & PG
- Proctor & Faculty Adviser for Students.
- Member of College Canteen Committee Member for several years.
- Associated with college Library as Member for several years.
- Worked as Time Table Officer of the Department for several years.
- Active Member in the syllabus revision committee of the department.
- Executive committee member, Staff Association for few years
- Worked as Secretary, S.M.E. for one term.
- Actively involved in the organization of in House Project Exhibitions in our college
- Worked as External Deputy Chief Superintendent for Engineering Exams.
- Associated in preparing documents for I.S.O, NBA, and NAAC etc.
- Editorial Board Member of International Conference conducted by our college.
- Subject Seminar Co-ordinator for some years.
- Monitoring committee member.
- Received BEST TECHINICAL PAPER PRESENTATION HONOUR IN CONFERENCES
Expertise/Subjects handled
- Mechanical Vibrations
- Dynamics of Machinery
- Kinematics of Machinery
- Design of Machine Elements
- Mechanics of Materials
- Machine Drawing
- Engineering Drawing
- Theory of Elasticity
- Control Engineering
- Finite Element Analysis
- Turbo Machinery
Research Interest:
- Advanced Engineering Materials for Industrial Applications.
- Design and Fabrication of Utility Machines.
- Mechanical Characterization of Engineering Materials
- Vibration analysis of Machines.
Funding Received
RECEIVED SANCTIONED AMOUNT OF RS.116800/- FROM AICTE UNDER RESEARCH PROMOTION SCHEME FOR THE PROJECT TITLED “CHARACTERISATION OF LM13 REINFORCED WITH TIB2 SUBJECTED TO WET/DRY ABRASIVE WEAR FOR INDUSTRIAL/AUTOMOTIVE APPLICATIONS”. SUCCESSFULLY COMPLETED AND SUBMITTED PROJECT CLOSURE REPORT IN AUG 2020, WHICH WAS SANCTIONED IN AUG 2017 FOR 3 YEARS DURATION
SOME OF THE TECHNICAL PAPERS PUBLISHED IN INTERNATIONAL/NATIONAL JOURNALS & PRESENTED IN INTERNATIONAL/NATIONAL CONFERENCES:
- National Conference on Mechanical Engineering at M.S.R.I.T, Bangalore on 13th & 14th 2009.Experimental & Computational Analysis of Flow through Plane and Corrugated Air Filters.
- The effect of Age hardening temperature on the Dry Sliding Wear Behavior of A356.0 alloy.Published by Scientific and Engineering Research Corporation (SERC): International Journal of Mechanical and Automobile Engineering (IJMAE): ISSN 0974-231X: Mar 2011-May2011: Special Edition Vol.14: Issue No: 01: pp [17-26].
- Effect of Heat Treatment on the Mechanical Properties of Al- 5.784 Zn2.115alloy.International Journal on Mechanical & Automobile Engineering. ISSN0974-231X, IJMAE March 2011- May 2011Summer Edition 2011 PP [24-28], Volume 13, Issue No 1.
- The effect of sliding speed on the dry sliding wear behavior of Al-5.784 Zn- Mg2.115 alloy .Published in INCRAME-2011, held at Chennai. T.N on 21-22nd May 2011
- Corrosion studies on heat treated A356.0 alloy”. Presented at the National Conference on
Emerging Trends in Mechanical Engineering (NCETME) held at M.S.R. Institute of
Technology, Bangalore, Karnataka, India on 8-9th June2011. - Microstructure and dry sliding wear behaviour of heat treated (T4) A356.0Alloy”. Presented at
the National conference on Emerging Trends in Mechanical Engineering (NCETME) at M.S.R.
Institute of technology. Bangalore, Karnataka, India on 8-9th June 2011 pp.: 69-82. - The Effect of Heat Treatment on Wear Behaviour of AA7075 Alloy. Presented and Published in National Conference at Acharya Institute of Technology on 21st Oct 2011.
- Effect of Heat Treatment on Dry Abrasive Wear of Al- 5.784 Zn Mg 2.115 alloy, International
Conference on “Emerging Trends In Manufacturing Technology” [5th & 6th September
2012] Toc H Institute of Science and Technology Arakkunnam-682313, Ernakulam, Kerala. - Study of Mechanical Properties and Fatigue Behaviour of Solution Treated 7075aluminium alloy.INCRAME 2012, International Conference on ‘Recent advances in Mechanical Engineering’, Department of Mechanical Engineering, Dr.MGR Educational& Research Institute University, Chennai on April 19th 2012 Paper Code; COM145.
- Fatigue Properties evaluation of Heat treated Alluminium 7075 alloy by Experimental Approach. International Conference on Challenges and Opportunities in Mechanical Engineering, Industrial Engineering and Management Studies. 11th to 13th July 2012 at M.S.R.I.T, BANGALORE.
- Study of characteristics of Al-4.5%CU (LM) alloy and activated carbon International Conference on Challenges and Opportunities in Mechanical Engineering, Industrial Engineering and Management Studies. 11th to13thJuly2012 at M.S.R.I.T, BANGALORE.
- Experimental Validation and Data Acquisition for Hyper Elastic Material Model in Finite Element Analysis. International Journal of Mechanical and Industrial Engineering (IJMIE) ISSN No. 2231 –6477 International Journal of Mechanical and Industrial Engineering (IJMIE), Vol-2, Iss-4, 2012.
- Effect of RRA on Tensile and Hardness Properties of AA 7075 Alloy. International Journal of Mechanical Engineering Research. ISSN 2249-0019 Volume 2, Number 3 (2012), pp. 189-198.
- Effect of Aging Temperature and of Retrogression Treatment Time on the Microstructure of AA 7075 Alloy. International Journal of Mechanical Engineering Research.ISSN2249-0019 Volume 2, Number 3 (2012), pp. 235-243
- Completeness-Compatibility and Reviews for Finite Element Analysis Results. International Journal of Engineering Research & Technology (IJERT)ISSN:2278- 0181Vol. 2 Issue 1, January- 2013
- “Micro structural Characteristics of Sr and Na Modified Al-Mg-Si Alloy”. International Journal of Innovative Research in Science, Engineering and Technology (ISO 3297: 2007 Certified Organization) Vol. 2, Issue 8, August 2013.
- “Micro structural Characteristics of Sr and Na Modified Al-Mg-Si Alloy” International Journal
of Innovative Research in Science, Engineering and Technology (ISO 3297: 2007 Certified
Organization). ISSN No. 2319-8753Volume 2, Issue 10, October 2013. - Effect of retrogression and re-aging heat treatment on Microstructure and corrosion properties of Al-7075. International Journal of Innovative Research in Science, Engineering and Technology. (ISO 3297: 2007 Certified Organization ISSN No. 2319-8753Volume 2, Issue 11, November 2013.
- “Effect of Ageing Temperatures on Aluminum Alloys”. National Conference in Mechanical Engineering, May 16th -17th, 2014, R.R.Institute of Technology,#67, Raja Reddy Layout, Chikkabanavara, Bangalore560090, Karnataka.
- “Comparison of Characteristics of Hybrid Composite Material produced by Stir CastingMethod”. National Conference in Mechanical Engineering May 16th -17th, 2014, R.R.Institute of Technology, #67, Raja reddy Layout, Chikkabanavara, Bangalore -560090, Karnataka
- Design and Fabrication of Cooling Slope for Semi-Solid Forming of Aluminium A356 Alloy“.Journal of Mechanical Engineering Research and Technology Volume-2, Number 1 (2014), pp.347-354
- “Finite element approach for strength analysis and optimization of Insteps for automotive trucks” presented in National Conference on “Recent Innovations in Science and Engineering” held at PESIT, Bangalore on 2ndMay 2015and has been DECLARED as the BEST TECHNICAL PAPER
- Hardness and wear characteristics of Hybrid Aluminium Metal Matrix Composites Produced by Stir Casting Technique”. 4th International Conference on Materials processing and Characterization. Materials Today: Proceedings2 (2015), pp. 2878-2885 (ELSVIER) 2-SEP-2015.
- “Automatic Pneumatic Bumper and Break Actuation before Collision” International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056 Volume: 02 Issue: 04 | July-2015 www.irjet.net p-ISSN: 2395-0072.
- “Mechanical properties of Aluminium alloy al356 matrix reinforced with zirconium particles” International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056 Volume: 02 Issue: 04 | July-2015 www.irjet.net p-ISSN: 2395-0072.
- “Progressive Damage Analysis of E-Glass Epoxy Composite Laminates” International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 02 Issue: 04 | July-2015 www.irjet.net p-ISSN: 2395-0072.
- “Work Hardening Characteristics of Non- Heat Treatable Aluminium Alloys” National Conference on “Recent Innovations in Science and Engineering” held at PESIT, Bangalore on 2nd May 2015
- “Detail Study of Parabolic Solar cooker SK-14”
- Heat Treatment of ceramic Reinforced Aluminium Matrix Composites-A Review International Journal-2016IJAER Vol 11. Issue No.1 e-ISSN-5152/p-ISSN: 2454-1796.
- Analysis of Roller Speed and Roller diameter-A Review. IJAER Vol 11. Issue No.1 e-ISSN-5152/p-ISSN: 2454-1796.
- Published paper on “STUDIES ON INFLUENCE OF ROLLER DIAMETER AND ROLLER SPEED ON PROCESS PARAMETERS IN HOT ROLLING PROCESS USING MANUFACTURING SIMULATION” in Technical Research Organization India. ISSN: 2393-8374, (online): 2394-0697, Volume-3, Issue 5. 2016.
- Published paper on “EFFECT OF QUENCHING MEDIA ON THE MECHANICAL PROPERTIES OF Al 6061-TiO2METAL MATRIX COMPOSITE” in Technical Research Organization India. ISSN: 2393-8374, (online): 2394-0697, Volume-3, Issue 5. 2016.
- Presented a paper on “study of Mechanical Behaviour of Aluminium alloy with Alumina and Bamboo Leaf Reinforcement” in International Conference on Applied Science Engineering and Technology at Sri Sairam College of Engineering (SSCE), Anekal-Bengaluru on 7th June 2016 and Chosen as the BEST PAPER PRESENTATION
- Presented a paper on “FINITE ELEMENT ANALYSIS OF ROLLING PROCESS USING AFDEX: A METHODOLOGY” in International Conference on Applied Science Engineering and Technology at Sri Sairam College of Engineering (SSCE), Anekal-Bengaluru on 7th June 2016.
- Presented a paper on “The effect of heat treatment on tensile and hardness properties of Al 6061 under T6 condition” in International Conference on Applied Science Engineering and Technology at Sri Sairam College of Engineering (SSCE), Anekal-Bengaluru on 7thJune 2016.
- ULTRASONIC INSPECTION-A REVIEW –Published in international Journal of Current Engineering and Scientific Research (IJCESR). Volume III, Issue X in the year 2016. ISSN (print): 23938374-ISSN Online: 23940697.
- Microstructure and Hardness of A356 Reinforced With Micro and Nanoal2o3 Particles Produced by Powder Metallurgy Technique
BOOKS & MONOGRAMS
Sl.No. | Title of the Book | Author(s) | Details |
1. | Power Plant Engineering. | P.L.Srinivasa Murthy & P.B.Nagaraj. | Spectrum Publications. (out of Print) |
2.
| Automobile Engineering. | P.L.Srinivasa Murthy & P.B.Nagaraj. | Sudha Publications. (out of Print) |
3.
| Theory of Machines-2 (2003) | P.L.Srinivasa Murthy & J.B.K.Das. | Sapna Publication, Bangalore. |
4 | Theory of Machines-1 (2004) | P.L.Srinivasa Murthy & J.B.K.Das. | Sapna Publication, Bangalore |
5 | Design of Machine Elements-1 | P.L.Srinivasa Murthy & J.B.K.Das. | Sapna Publication, Bangalore. |
6 | Design of Machine Elements-2 | P.L.Srinivasa Murthy & J.B.K.Das | Sapna Publication, Bangalore |
7 | Kinematics of Machines | P.L.Srinivasa Murthy & J.B.K.Das | Sapna Publication, Bangalore |
8 | Dynamics of Machines | P.L.Srinivasa Murthy & J.B.K.Das | Sapna Publication, Bangalore |
9 | Mechanical Vibrations | P.L.Srinivasa Murthy & J.B.K.Das | Sapna Publication, Bangalore |
10 | Mechanics of Materials. | P.L.Srinivasa Murthy & J.B.K.Das | Sapna Publication, Bangalore |
11 | Engineering Drawing-1 For Diploma. | P.L.Srinivasa Murthy, J.B.K.Das & Viswanath. | Sapna Publication, Bangalore |
12 | Engineering Drawing-2 For Diploma. | P.L.Srinivasa Murthy, J.B.K.Das & Viswanath. | Sapna Publication, Bangalore |
13 | Engineering Drawing For Diploma. | P.L.Srinivasa Murthy, J.B.K.Das & Viswanath. | Sapna Publication, Bangalore |
14 | Strength of Materials For Diploma | P.L.Srinivasa Murthy, J.B.K.Das & Viswanath. | Sapna Publication, Bangalore. |
15 | Mechanics of Machines | P.L.Srinivasa Murthy & J.B.K.Das | Sapna Publication, Bangalore |
· Actively Involved in Preparation & Procurement of Lab Manuals for the Department. |
Hobbies
- Watching and Playing Cricket. Represented M.S.R.I.T Staff Cricket Team for 15 Years and our Team have WON many Trophies during the Period.
- Writing Technical Books.
- Listening to Music
- Writing Quotes.