This post was last updated on August 5th, 2024
M.Tech (VLSI & Embedded Systems)
Postgraduate Programme
Department Overview
M.Tech VLSI Lab is equipped with industry standard EDA tool from Cadence Design System. Students will explore the CAD tool and understand the flow of Full Custom IC design cycle. Both analog and digital designs are implemented in this Lab. Digital circuits such as inverter, buffer, transmission gate, flip flop, counters are simulated and verification using CADENCE NC Sim tool. Students develop Verilog Code for the front end design of digital circuits like different types of adders, multipliers, comparator, LFSR, parity generator, universal shift registers and state machine design. Digital circuits are implemented using Xilinx FPGA devices. Analog designs such as inverter, CS, differential Amp, Op-Amp, integrator and R-2R DAC are developed and checked for DRC, LVS and Parasitic Extraction are carried out using cadence tools. The Pre layout and Post layout simulation are performed under virtuoso environment; tool Assura supports the design rule check, layout versus schematic check and extraction of parasitic which are required for Post layout simulation. The Mixed signal simulations are performed using AMS Designer. Students develop assembly language and embedded C coding to explore ARM- Cortex M3 with support of Keil uVision for different applications such as buzzer, temperature sensor, LCD display, stepper motor and to display message
BNMIT
To be a preferred destination for management education and entrepreneurship development.
To provide contextually relevant management education with learner centric pedagogies.
To develop skilled, competent and socially conscious managers.
To cultivate entrepreneurial culture among the students.
Key Highlights
Highlights
Heading
Highlights
Heading
Highlights
Heading
Highlights
Heading
HOD's Message
The department is headed by Dr. Mukesh Patil. He has a teaching experience of 18 years in the field of Mechanical engineering. He obtained his B.E. degree from Mysore University. He is a Gold Medalist in M.Tech from VTU, Belagavi. He obtained his Ph.D. from VTU, Belagavi in Thermal Engineering under the guidance of Dr.K.N.Seetharamu and Dr.Pradeep G. Hegde. He is actively involved in research activities in the field of Thermal Engineering. He has published 04 research papers in international journals and has presented papers in 02 international conferences. His areas of interest include thermodynamics, heat transfer, porous materials, fluidics, and energy engineering.
Programmes
TESTIMONIALS
- Alumni
- Student
- Parent